Category | Portable gas detector |
---|---|
Type | Single gas |
Detection gas | Toxic |
Principle of detection | Electrochemical |
Sampling method | Diffusion |
Display of alarm | Flashing light, Buzzer, Vibration |
Explosion protected construction | Intrinsically safe |
Approvals | CSA, C/US |
Power source | Alkaline batteries (Size AA) 2 pcs |
Battery life | More than 250 hours (at 25℃, no alarm) |
Dimensions | 63(W) x 131(H) x 31(D) mm, without sensor top |
Weight | Approx. 215g<br>Including: alligator clip and rubber protector (excluding Alkaline batteries) |
Operating temperature range | -20℃ to 50℃ |
Operating humidity range | Below 95%RH (Non-condensing) |
เพิ่ม “FLUKE TL224 Suregrip Silicone Insulated Test Leads, 1.5m Silicone-Insulated Wire Resist Heat and Cold Superior Staring Relief, CAT III 1000V, 10A” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
สินค้าในกลุ่มนี้ทั้งหมด

RIKEN KEIKI Portable Gas Leak Checker Model : SP-220 series
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว

RIKEN KEIKI Portable Gas Detector Model : GX-6000
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Single Toxic Gas Monitor Model : SC-01
รหัสสินค้า: SC-01฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
RIKEN KEIKI
Smart interchangeable sensors
Remote monitor capability by optional extender cable (3m)
Compact and light weight 63W x 131H x 31Dmm, 215g
250 hours of continuous operation
Operates on 2 "AA" alkaline batteries
รหัสสินค้า:
SC-01
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: RIKEN KEIKI, เครื่องมือตรวจจับแก๊ส, เครื่องมือวัดละเอียด
คำอธิบาย
Documents
สินค้าที่เกี่ยวข้อง
FLUKE 80K-40 High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only.
SKU:
80K-40
FLUKE 80PK-1 General Purpose Bead Probes, Measurement range -40°C to 260°C No suitable for liquid immersion.
SKU:
80PK-1
FLUKE AC280 SureGrip Hook Clips for use with TL222 and TL224 test leads
SKU:
AC283
FLUKE 80I-110S AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC,
SKU:
80I-110S
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE 80AK-A Thermocouple Adaptor, Adapt Type-K Thermocouple mini-connector to dual banana plug
SKU:
80AK-A
FLUKE 80T-150UA Universal Temperature Probe Output 1mV°C Measurement range: -50 to 150°C Compatible with Fluke DMMs
SKU:
80T-150UA
FLUKE PM9082/001 Dual Banana Jack Female to Male BNC Adapter 4mm Banana Contact Adapter, for Fluke 190 and 90 Series Scopemeter
SKU:
PM9082/001